Epoxy.com Installation Guide #1Epoxy Coating InstallationDid You Know?Product #1, Product #2, and Product #630 are all available in a normal (floor grade) and also in a Wall Grade. The floor grade coating levels better on floors. The wall grade hangs better on the wall, minimizing runs. Product #1, and Product #2 are available in normal cure, fast cure and cold cure.
Before installing epoxy coating it is important that you first do
proper surface preparation. Please review the Epoxy.com "Surface
Preparation" Technical Bulletin at
http://www.epoxy.com/surfaceprep.aspx . You will also want to
review the "Does and Don'ts" located at
http://www.epoxy.com/install.htm.
If you do not have access to the internet please contact Epoxy.com Customer service at 321-206-1833 and ask to have it faxed or postal mailed to you. Must Visit LinksProducts Covered by this GuideAlthough each Epoxy.com may have slight variations in installation technique, this guide is an excellent tool when installing the following Epoxy.com Products:
PrimersPrimers can be one of the most important considerations of your installation. Most of the products covered under this installation guide can be installed without a primer. However, there can be major advantages to your job if you use the right primer. For example if you use Product #899 Primer under  
Proper MixingOne method to insure accurate mix ratios is to put measurements on sticks, with the appropriate mix ratio. The picture to the right is a picture of a 2:1 mix ratio, using this method Crack and Joint RepairsAfter a floor is properly cleaned, the next step is repairing the random cracks, cold joints and saw-cut joints. Repair non-moving joints and cracks with Epoxy.com Product #703. Minor holes and depressions can be filled with Product #703. as well. Major resurfacing of very rough floors can be done with any of the Epoxy.com Epoxy or Polymeric mortar systems. Joints can also be filled with Epoxy.com Product #11 Flexible Joint Filler. Structural cracks should be repaired by epoxy injection or Epoxy.com Product #685 Crack Healer-Sealer . Non-moving joints and cracks can be repaired with Epoxy.com Product #703. Minor holes and depressions can also be filled with Product #703 as well. Major resurfacing of very rough floors can be done with any of Epoxy.com Epoxy, or Polymeric mortar systems like Epoxy.com - Product #10, Product #15, Product #25, Product #28,or Product #680. Moving joints can also be filled with Epoxy.com Product #11 or with Epoxy.com Product #703. |
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all
Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
