Manual Table of Contents


[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Systems] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers and Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format ] [MSDS in Acrobat Format] [Online Ordering Authorization Form]

 

Epoxy.com Logo - Epoxy, Polyurethane, Polysulfide, Polyester, MMA - Methyl Methacrylate and other Construction Resin Systems - Over 350 Products- Since 1980  

                                                   

 

The following list was added manually. The bottom section is added automatically!

  1. Epoxy.com Product #1 (100% Solids Epoxy Coating)
  2. Epoxy.com  Product #2 (100% Solids, High Chemical Resistance, Epoxy Coating)
  3. Epoxy.com  Product #3 (100% Solids, Epoxy Injection Resin)
  4. Epoxy.com Product #5 (100% Solids Hi-Mod Gel Adhesive)
  5. Epoxy.com (tm) Product #6 (100% Solids High Mod Gel Adhesive)
  6. Epoxy.com Product #7 (100% Solids Epoxy Bonding Agent for Wet to Dry Concrete Bonding)
  7. Epoxy.com Product #7SC
  8. Epoxy.com Product #9 - Lo Mod Adhesive
  9. Epoxy.com  Product #10 (100% Solids Lo-Mod Lo -Viscosity Epoxy Adhesive )
  10. Epoxy.com Product #11 100% Solids Epoxy (Flexible) Control Joint Filler
  11. Epoxy.com Product #12 (100% Solids, Chemical Resistant Epoxy Primer)
  12. Epoxy.com Product #15 (100% Solids, Chemical Resistant, Seamless Epoxy Flooring Resin)
  13. Epoxy.com Product #17 (100% solids, Epoxy Bonding Agent for Stone Overlays
  14. Epoxy.com Product #18 (100% Solids, General Purpose Epoxy)
  15. Epoxy.com  Product #30 Flexible Methyl Methacrylate Mortar Resin
  16. Epoxy.com Product #63 EVA Expansion Joint Material
  17. Epoxy.com Product #68 & 69 Colored Aggregates
  18. Epoxy.com Product #201
  19. Epoxy.com Product #215
  20. Epoxy.com Product #301 Low Viscosity Injection Resin
  21. Epoxy.com™ Product #315 Polymeric Multi-Colored Flake Floor Resurfacing System
  22. Epoxy.com Product #318 High Temperature Epoxy
  23. Epoxy.com Product #630 Novolac Epoxy Mortar (98% Sulfuric Acid Resistant)
  24. Epoxy.com  Product #633 Epoxy Novolac Coating
  25. Epoxy.com Product #635 Epoxy Novolac (High Solids)
  26. Epoxy.com Product #850 (50% Solids - Penetrating Epoxy Sealer)
  27. Epoxy.com Elastomeric Membrane
  28. Epoxy.com Damp Primer-Sealer
  29. Bonding Systems
  30. C881DEF
  31. Chemical Resistance
  32. Coating Systems.
  33. Directory of Epoxy.com  Web Site
  34. Epoxy Resin in Construction Home Page
  35. Epoxy.com  Product #63 EVA Tech Data Sheet
  36. eva_spec.htm
  37. Epoxy.com  FAQs
  38. Epoxy.com Feedback Page
  39. Epoxy.com Main Mailer
  40. Guest Book
  41. Electric Operated Injection Equipment
  42. Air Operated Injection Equipment
  43. Resin Home Page -)
  44. Industrial Floors
  45. Injection of Concrete and Wood
  46. Epoxy Injection of Concrete & Wood
  47. Joint Systems
  48. Misc. Information on Epoxy.com Products and Services
  49. Methyl Methacrylate (MMA) Resin in Construction Home Page
  50. Epoxy.com News Page
  51. Patching Resin Systems
  52. Commonly Used Epoxies
  53. Common Problems and The Epoxy Solutions
  54. Epoxy.com , Inc.'s Technical Service Rebate Program
  55. Resinous Mortars and Their Uses In Construction
  56. Resin Home Page -)
  57. Epoxy Coating &Ultra Pure Water Tank Coating (RODI)
  58. Sealing Systems
  59. Epoxy.com
  60. Epoxy.com a division of Epoxy Systems, Inc Home Page
  61. Epoxy.com Epoxy Terrazzo
  62. Epoxy.com Vinyl Ester Systems
  63. What's New
  64. Epoxy.com Polyester Wood Filler
  65. Epoxy.com Seamless Resurfacing Chips
 

Exclaim

Proper mixing and installation is critical to the optimal success of all product.  See Installation Tips, Techdata, & MSDS for more details on our products.  Be sure to contact us with any questions and/or concerns that you have.

For more information please contact:

Epoxy.com
A Division of Epoxy Systems, Inc
20774 W. Pennsylvania Ave.
Dunnellon, Florida 34431
Over 300 products,
Since 1980
Florida & Vermont
USA

Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time).
Closed 12Noon-1PM Eastern Time for Lunch.

321-206-1833   Customer Service - Ordering and Order Status
                          Katey Fontaine, VP - Customer Service Director
                          sales@epoxy.com

714-657-3826  Technical Support
or                     Norm Lambert, President - Technical Support Director 
352-533-2167  info@epoxy.com
  
352-489-1666   Accounting and Administration
                          Debby Lambert, CEO, and CFO
                          office@epoxy.com 

352-489-1625   Fax line to all Departments
                         www.epoxy.com

24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253

We accept MasterCard, Visa, American Express, Discover, Wire Transfers, and Cashiers Checks We accept MasterCard, Visa, American Express, Discover, Wire Transfers, or Cashier's Check.

Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont.  All rights reserved.

Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping.

This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved.

Epoxy.com a division of Epoxy Systems, Inc.  warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months;  Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight  Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days.   Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com  within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com  SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability.

Many of our products are made on an individual order basis.   Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater.  No returns on non-list priced items.  All Returns are for merchandise (store) credit only, no cash or credit card credits.  In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.

 

[Home] [Catalog of Products] [Where to Start] [[Bonding Systems] [Chip Floors] [Chemical Resistance]
[Coatings] [Conductive] [Applications] [Elastomeric Systems] [High Temperature]
[Industrial Floors] [Injection] [Joint Systems & Sealants] [Mortars / Grouts] [Novolac] [Polymer Systems]
[Primers and Sealers] [Misc.] [Seamless Flooring] [Waterproofing] [Dealers Wanted] [Installation Tips]
[Product Guide] [Wood Filler] [Who We Are] [Guide Specs]
[Tech Data Sheets in Acrobat Format ] [MSDS in Acrobat Format] [Online Ordering Authorization Form]


Hit Counter

 

Secure Login