|
Epoxy.com Self Leveling Flooring SELF LEVELING FLOORING/SELF LEVELING BROADCAST FLOORING Epoxy.com SELF LEVELING FLOORING/SELF LEVELING BROADCAST FLOORING consist of 100% solids epoxy and aggregates producing a fluid, self-leveling mixture that can be spread with a V-notched squeegee or trowel. These systems are the answer for both new construction and renovated areas, and can be installed over most sound floors. CHEMICAL RESISTANCE: Epoxy.com Self Leveling FLOORING/Self Leveling Broadcast FLOORING can be made chemical resistant with HIGH PERFORMANCE (HP) finish coat(s). For specific information, consult Epoxy.com TECH SERVICE DEPARTMENT for best choice. Epoxy.com SELF LEVELING FLOORING, when cured, produces a dense, non-porous floor that is chemical and dirt resistant. Epoxy.com SELF LEVELING FLOORING is a seamless, low maintenance system exhibiting high wear and durability for light to medium traffic areas. Epoxy.com SELF LEVELING FLOORING may be sealed with a top coat to further enhance abrasion resistance, gloss retention, and non-skid properties. Epoxy.com SELF LEVELING FLOORING is a broadcast system of selected aggregates. The slurry system is a seamless, low maintenance system exhibiting high wear, durability, and impact resistance for medium traffic areas. To fill in pores and secure the aggregate, a second epoxy coating is applied producing a textured, skid resistant floor. Epoxy.com SELF LEVELING FLOORING’s textured finish is chemical and dirt resistant. Epoxy.com SELF LEVELING FLOORING can include Epoxy.com WATERPROOFING MEMBRANES, producing a waterproof, crack resistant system. An integral cove base can be installed in areas requiring seamless wall to floor coatings. Uses
Physical Properties Weight: 1/16 inch thick 0.5-0.7 lbs/ft2 Flammability ASTM D-635 Self Extinguishing Fungus & Bacteria Resistance MIL-F-52505 §4.4.2.11: Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests specified in TTP34 Bond Strength to Concrete, p.s.i Adhesive Strength MIL-D-24613 420 p.s.i Hardness ASTM-D-2240 Shore D 80-84 Water Absorption Thermal Shock Resistance Abrasion Resistance Impact Resistance Compressive Strength Tensile Strength ASTM-C-307, p.s.i 2,400 Flexural Strength ASTM-C-580, p.s.i 4,300 Coefficient of Friction Thermal Coefficient of Expansion Neat Resin (no aggregate): Compressive Strength Ultimate Tensile Strength Tensile Elongation Flexural Strength ASTM-D-790, p.s.i 7800 Flexural Modulus ASTM-D-790, p.s.i 2.5 x 105 Epoxy.com
SELF LEVELING FLOORING
COMPOSITION: Epoxy.com SELF LEVELING FLOORING and SELF LEVELING BROADCAST FLOORING are composed of 100% solids epoxy resin filled with a variety of graded quartz, silica, or ceramic fillers that can be modified to create the best design mix for ideal performance. A wide selection of finish coats is available for varying exposure requirements. CONSIDERATIONS:
SURFACE PREPARATION: Surface Preparation is the most critical portion of any successful resinous flooring system application. All substrates must be properly prepared as outlined by EpoxySystems. Work must be performed by trained or experienced contractors or maintenance personnel. The Epoxy.com Technical Service Department is pleased to answer any questions. APPLICATION:
CURING TIME:
CLEAN-UP: All tools and equipment should be cleaned before materials gel. Use Xylene or lacquer solvent.
COLOR SELECTION: Epoxy.com Self Leveling FLOORING/Self Leveling Broadcast FLOORING is available in a variety of standard colors. Custom colors are available subject to laboratory approvals, minimum quantities, lead time for production, and increased cost. Epoxy.com TECH SERVICE DEPARTMENT are ready to assist. Technical Data: Chemical Resistance: For specific information, consult Epoxy.com TECH SERVICE DEPARTMENT for best choice.
CAUTION: WARNING! A Component contains epoxy resin. B Component contains alkaline amines; strong sensitizer. May cause skin sensitization or other allergic responses. Use with good ventilation, particularly if material is heated or sprayed. Prevent all contact with eyes or skin. Wear protective clothing, goggles, gloves, and/or barrier creams. Keep container closed when not in use. Wash thoroughly after handling.
FOR INDUSTRIAL USE ONLY / KEEP AWAY FROM CHILDREN
|
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all
Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
can include an integral cove base in areas requiring
seamless wall to floor coatings.
