|
Epoxy.com Epoxy Terrazzo100%
Solids Epoxy Terrazzo Binder
| ||||||||||||||||||||||||||||||||||||||||||||
| System Performance Properties | |
| Flammability ASTM D-635 | Self extinguishing |
| Fungus & Bacteria Resistance MlL-F-52505 § 4.4.2.11 |
Will not support growth of fungus or bacteria when subjected to mildew and bacteria tests. |
| Electrical Conductivity | Nonconductive. Conductive Formulation is available. |
| Bond Strength to Concrete, p.s.i ACI COMM # 403, Bulletin 59-43 |
350 p.s.i (100% concrete failure) |
| Resistance to Elevated Temperature Mil-D-3134F § 4.7.4 |
No slip or flow at required temperature of 158° F |
| Indentation MIL-D-3134F § 4.7.4 | Withstands 2,000 1bs./sq. in. for 30 minutes without indentation |
| Water Absorption, % ASTM D-570 | .010 |
| Thermal Shock Resistance ASTM C-884 | Passes |
| Abrasion Resistance ASTM D-4060 | 35 mg |
| Impact Resistance MIL-D-3134F § 4.7.3 | Withstands 16ft/lbs. without cracking, delamination, or chipping. |
| Compressive Strength, p.s.i ASTM C-579, 7 days |
9,000 min. |
| Tensile Strength, p.s.i ASTM C-307 | 2,500 |
| Flexural Strength, p.s.i ASTM C-580 | 3,000 |
| Thermal Coefficient of Expansion, in/in/° F ASTM C-531 |
21x10-6 |
| Neat Resin Performance Properties | |
| Compressive Strength, p.s.i ASTM-D695 | 15,500 |
| Ultimate Tensile Strength, p.s.i ASTM-D638 | 3,000 |
| Tensile Elongation, % ASTM-D638 | 4-8 |
| Flexural Strength, p.s.i ASTM-D-790 | 4,000 |
| Flexural Modulus, p.s.i ASTM-D-790 | 2.3 x 105 |
| Hardness ASTM-D-2240 | 65-85 |
COLORS & PATTERNS
The Epoxy.com EPOXY TERRAZZO flooring system provides broad design flexibility. Unlimited beauty is achieved by selecting colors, patterns, and aggregate. Intricate, lasting designs can be created to the owner's requirements. Epoxy.com ™ EPOXY TERRAZZO allows the interior designer a wide choice of color from deep reds and blues to pastels. Colors will not fade or wear thin. The imaginative use of divider strips, including brass, allows Epoxy.com EPOXY TERRAZZO to produce lasting variations of colors, designs, and configurations.
TYPICAL USES
Epoxy.com EPOXY TERRAZZO is ideal for almost any area where a monolithic, heavy duty floor surface is needed. In addition, Epoxy.com ™ EPOXY TERRAZZO provides the ultimate in beauty and design. It is ideal for commercial, industrial, and institutional applications. Epoxy.com ™ EPOXY TERRAZZO, when combined with marble or granite aggregate, withstands heavy industrial wear and chemical attack making it ideal for pharmaceutical and chemical plants. Epoxy.com ™ EPOXY TERRAZZO is the best choice for schools, hospitals, institutions, and health care facilities due to its sanitary, joint free surface that is easily cleaned. Epoxy.com ™ EPOXY TERRAZZO achieves the lowest life cycle costing of any hard surface flooring.
CURE TIME
18-24 hours prior to grinding.
APPLICATION
Surface Preparation
Concrete surfaces must be in sound condition and properly prepared per manufacturer's recommendations. Contact Epoxy.com Technical support for surface preparation guidelines.
Installation
Set divider strips according to architect's specifications for appearance.
Prime the substrate with Epoxy.com Product #K502 100% Epoxy Primer. Allow to set for a minimum of 30 minutes before applying Epoxy.com EPOXY TERRAZZO.
Mix Epoxy.com EPOXY TERRAZZO 3 parts A to 1 Part B by volume for 3 minutes; add the specified aggregate.
Install Epoxy.com ™ EPOXY TERRAZZO to the thickness specified in the architect's design.
Trowel finish and compact to desired thickness and allow to cure.
Rough grind Epoxy.com ™ EPOXY TERRAZZO surface using 24 grit stones then follow with a medium grind using 80 grit stones.
Grout Terrazzo surface with Epoxy.com™ EPOXY TERRAZZO GROUT to seal the surface and fill pores and pinholes. Allow the floor to cure overnight.
Polish by grinding surface with fine grit stones. Grouting and polishing procedure may need to be repeated if porosity remains.
Clean surface thoroughly and seal with either Epoxy.com ™ ACRYLIC SEALER or Epoyx.com ™ URETHANE FINISH depending on the specified performance requirements.
MAINTENANCE
After completing the application of Epoxy.com EPOXY TERRAZZO, the installer should provide the owner with maintenance instructions. If floors become slippery due to animal fats, oil, grease, or soap film, clean and rinse thoroughly. Epoxy.com ™ EPOXY TERRAZZO is easily cleaned with neutral soaps or detergents. Routine mechanical scrubbing is recommended for all surfaces having a non-skid texture. Waxing is optional. Long periods of heavy traffic May cause wear patterns necessitating a Maintenance application of a finish coat.
TECHNICAL SERVICE
Epoxy.com Technical Support Department provides services and consultations on material selection, specification, troubleshooting, and other information on the proper repair and protection of concrete surfaces.
|
Proper mixing and installation is critical to the optimal success of all product. See Installation Tips, Techdata, & MSDS for more details on our products. Be sure to contact us with any questions and/or concerns that you have. For more information please contact: Epoxy.com Office Hours: 9AM-4PM Eastern Time (6AM-1PM Pacific Time). 321-206-1833 Customer Service - Ordering and Order Status 714-657-3826 Technical Support 352-489-1625 Fax line to all
Departments 24 hour Hazmat Emergency Telephone Response Service -1-800-633-8253
Copyright © 1994-2010 EPOXY.COM a division of Epoxy Systems, Inc. - Florida and Vermont. All rights reserved. Unless other wise agreed upon in writing, buyer is responsible for the cost of shipping. This information is presented in good faith to assist in determining whether this product is suitable for application. No warranty or representation, however, is intended or made, nor is protection from any law or patent to be inferred, and all patent rights reserved. Epoxy.com a division of Epoxy Systems, Inc. warrants its products (when properly stored) for the period of time as follows: Epoxies, Product #315, Product #315BC, and Product #316 one (1) year; Polyesters, Methyl Methacrylates (normal) two (2) months and Polyurethanes Four (4) months; Power Tools and Equipment 90 days; Vinyl Esters, High Molecular Weight Methacrylates (HMMA) and all other resins (not specifically mentioned above) 30 days; hand tools (non-power tools) 30 days. Epoxy.com warrants that its products will be free of manufacturing defects and will be in conformity with published specifications when handled, stored, mixed and applied in accordance with recommendations of Epoxy.com. If any product fails to meet this warranty, the liability of Epoxy.com will be limited to replacement of any non-conforming material if notice of such non-conformity is given to Epoxy.com within the warranty period for the material (as indicated above), or within 1 year of the delivery of materials (whichever is sooner). Epoxy.com may in its discretion refund the price received by Epoxy.com in lieu of replacing the material. No customer, distributor, or representative of Epoxy.com is authorized to change or modify the published specifications of this warranty in any way. No one is authorized to make oral warranties on behalf of Epoxy.com. In order to obtain replacement or refund the customer must provide written notice containing full details of the non-conformity. Epoxy.com reserves the right to inspect the non-conforming material prior to replacement. EXCEPT FOR THE EXPRESSED WARRANTY STATED ABOVE, THERE ARE NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR PURPOSE. Epoxy.com 'S OBLIGATION SHALL NOT EXTEND BEYOND THE OBLIGATIONS EXPRESSLY UNDERTAKEN ABOVE AND Epoxy.com SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OR ANY THIRD PARTY FOR ANY LOSS, COST, EXPENSE, DAMAGE OR LIABILITY, WHETHER DIRECT OR INDIRECT, OR FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. All quotes and sales subject to availability. Many of our products are made on an individual order basis. Unless authorized in writing by Epoxy.com a division of Epoxy Systems, Inc. in writing before the material is made, there are no returns on items purchased from us, once the order has been processed, and the material made. In the event of authorized returns a restocking charge will be charged in the amount of 30% of the value of the material returned or $150 whichever is greater. No returns on non-list priced items. All Returns are for merchandise (store) credit only, no cash or credit card credits. In the event of a return, buyer is responsible for the cost of shipping and handling in both directions.
[Home] [Catalog of Products]
[Where to Start] [[Bonding Systems]
[Chip Floors] [Chemical Resistance]
|
